24pcs Racks Modular Data Centers With Cabinet Channels Power Supply

Product Introduction                                   

The modular data center is mainly composed of cabinets, closed channels, power supply and distribution systems, refrigeration systems, intelligent monitoring systems, integrated wiring and fire protection systems. A single modular data center is configured according to N cabinets (including server cabinets, network cabinets, and integrated wiring cabinets). The module (not including UPS) covers an area of 35m², plus the maintenance channel outside the module and the PDF cabinet that supplies power to the air conditioner in the module, the total area does not exceed 55m², and the total height of the module does not exceed 2.65m. The number of cabinets can be reduced or increased in pairs according to customer needs.

Benefits                                                  

Rack Part

The modular data center can be configured with N cabinets, including server cabinets, network cabinets and integrated wiring cabinets.

Appearance of the cabinet

The cabinet size of the modular data center configuration is uniform, the cabinet conforms to the IEC60297-1 standard, and the front and rear air ducts are adopted. The appearance of the cabinet is shown in the figure.

Cabinet Charaectristic

(1) The ventilation rate of the front and rear doors is 70%.

(2) Two vertical PDUs can be installed at the rear of the cabinet.

(3) The exact position of each "U" is marked on the vertical installation column of the cabinet. The front door, back door and side panels of the cabinet can be locked and can only be opened with the provided special key

Aisle Containment -Modular design

The Aisle of the modular data center is mainly composed of end doors and skylights.

End gate

(1) The end doors of the aisle are divided into sliding doors and double doors, which can be selected according to customer needs.

(2) Sliding door size: height × width × depth = 2050mm × 1200mm × 42mm.
The sliding door adopts a sliding structure, the cabinet is used as the carrier, and the upper and lower rails are installed to ensure the independence of the closed channel system. The door panel is bent from 1.5mm cold-rolled steel plate, and tempered glass is installed in the middle to ensure the visibility of the area in the passage.
Adopting modular unit design concept, each unit can be installed and disassembled independently, and can be closely connected with adjacent units, which is convenient for disassembly and assembly; at the same time, it is also suitable for maintenance and management of other equipment on the channel.
Good sealing
All unit modules in the hot and cold aisle system are connected precisely, and the parts are sealed with good sealing tops or sponge strips, which not only maintains the aesthetics, but also prevents the leakage of cold air in the cold aisle.
Good light transmission
The system is composed of toughened glass with strong light transmittance

Power Supply- Modular UPS

According to the power supply requirements of large and medium-sized data centers, a modular UPS solution has been introduced, which can be flexibly configured with 80-300kVA modular UPS according to the customer's system power supply requirements. The module adopts advanced high-frequency switching technology, fully digital DSP control technology and the world’s leading active PFC and LLC topologies to achieve high input power factor, accurate output current sharing performance, and reliable monitoring and management system. The equipment provides safe, reliable and pure AC power.

Cooling System - In Row Air Conditioning Unit

Inverter In Row air conditioners are tailor-made high-density cabinets, adopts advanced frequency conversion technology and uses the environmentally friendly refrigerant R410A. The output cooling capacity is adjusted in real time according to the change of the detected load, to avoid frequent start and stop, and to ensure the temperature of the computer room environment.
Compared with fixed frequency air conditioners, the annual energy saving rate of variable frequency inter-train air conditioners can reach 29%

Monitoring System

The monitoring system system has the characteristics of simple configuration, strong access, and high reliability. It can manage all power, environment, and cooling in data center, integrate mainstream brand access control, video and other security systems, through distributed collection, high concurrent processing capabilities Meet the needs of networked monitoring and management of multiple computer rooms, allowing data center operation and maintenance personnel to control the operation safety of the computer room in real time.