Small Bank Outlets Dedicated Air Cooling System Lower Cooling Capacity

Product Introduction                                         

In order to achieve more accurate and effective control of room temperature and humidity. The high-precision air conditioner for Cool-smart laboratory is collected and processed by multiple temperature and humidity sensors, and the temperature and humidity of the height surface are controlled according to the height of the reference surface of the laboratory set by the user. This series of air-conditioning products are suitable for high-precision laboratories, electronic product production workshops, testing and calibration rooms and other places with high requirements.

Features                                               

Air supply system
Up air supply system, indoor hot air is sucked in through the return air outlet of the Cool-smart units, and then sent to the air by the fan after passing through the coil cap or duct. The upper air system G4 filter is installed in the return air outlet of the unit.
Downward air supply system, indoor hot air is sucked in through the G4 filter on the upper end of the unit, and then passed to the bottom platethrough the coil by the fan of the unit.

The outdoor unit
The air-cooled outdoor unit is installed outdoors;

The outdoor unit includes: condensing coil, axial flow fan and motor, etc.

Indoor unit parts
Cool-smart series indoor units are equipped with evaporator coils, expansion valves, fans, floor water leak detectors, filter driers, high pressure/low pressure switches, high pressure sensors, and compressors. A heater and humidifier are optional equipment. External input power needs to be equipped with a power switch.
Evaporator coils are constructed of copper tubes and aluminum fins and are designed for the high sensible heat requirements of electronic equipment. The indoor air circulation is completed by a centrifugal fan with a high-efficiency, low-noise, backward-inclined outer rotor, which has been adjusted for dynamic balance before leaving the factory. The fan is built with self-adjusting bearings and permanent grease, so there is no need for separate bearing maintenance during its lifetime.

Comprossor

Certificates                                                    

Factory Details                                       

Packing & Delivery                                              

Case